BlueRange BRBJ5T Инструкция по эксплуатации - Страница 3
Просмотреть онлайн или скачать pdf Инструкция по эксплуатации для Джеки BlueRange BRBJ5T. BlueRange BRBJ5T 4 страницы. Hydraulic bottle jack
Печатать страницуOPERATION
LOWERING
LOWERING
●
●
1. Lower the Jack by turning the release valve (1) slowly anti-clockwise with
1. Lower the Jack by turning the release valve (1) slowly anti-clockwise with
the notched end of the handle. Do not release the valve too much as this
the notched end of the handle. Do not release the valve too much as this
could result in an uncontrolled descent of the load.
could result in an uncontrolled descent of the load.
2. To stop the descent at any time close the release valve with an clockwise
2. To stop the descent at any time close the release valve with an clockwise
turn.
turn.
MAINTENANCE & STORAGE
STORAGE
●
Before storing the Jack clean and lubricate all moving parts with a acid
free oil. The Jack should be stored in a clean dry area.
When storing the jack the ram should be in its lowest position to minimise
corrosion and the handle removed and stored safely.
MAINTENANCE
●
IMPORTANT only fully qualified personnel should attempt any maintenance.
DO NOT use the Jack if it is believed to have been subject to abnormal loads
or shock. Inspect the unit and take appropriate remedial action.
Before each use visually check the Jack for abnormal wear, cracks, corrosion
or other signs of wear or damage.
At ambient temperatures (-3C – 45C) use machine oil (GB 443-84) N15 at
temperatures 15C to 13C use synthetic spindle oil (GB44164)
Ensure sufficient oil is in the Jack to enable it to reach its full lift.
●
3
BOTTLE JACK
SCHEMATIC DIAGRAM
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
Release valve lever
Base
0-Ring
Hydraulic cylinder
Ram
Hydraulic oil
0il-tight tank
Extension screw
Top cap
Pump plunger
Pump Body
0-Ring
BOTTLE JACK
4