Ega Master 63358 Руководство по эксплуатации - Страница 6

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Фреза Ega Master 63358. Ega Master 63358 12 страниц. Hinged pipe cutter

2. MARK THE CUT

- With the surface of the tube as clean as possible, begin marking the cut by moving the cutter

back and forth in oscillations of 90 to 110 degrees, tightening the handle approximately 60º

(less than a quarter turn) every other oscillation.

- Check that the blades follow the same cutting path. If not, correct the position before

continuing with the work, ensuring perpendicularity with respect to the tube.

3. FINISH THE CUT

- Once the cut is marked, the work rate can be accelerated. Over-tightening the cutter is

counterproductive; cutting deeper, but slower and more likely to break the blades.

WARNING

DO NOT STOP MID-CUT FOR A CONSIDERABLE TIME!

THE CUTTING ACTION GENERATES HEAT IN THE TUBE. WHEN THE BLADES COOL THEY

MAY STAY COINED IN THEIR GROOVE.