Askey TCG220 Краткое руководство по эксплуатации - Страница 6

Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Модем Askey TCG220. Askey TCG220 8 страниц.

3. Connecting the Residential VoIP cable modem to Your Computer

Installation Procedure for Ethernet Interface

Follow the steps below for proper installation:

1. Connect one end of the coaxial cable to the CABLE connection on the wall, and the other

end to the CABLE jack on the TCG220‐Tdp.

Note: To speed up the registration process of cable modem, the coaxial cable should be

connected to the modem before the modem turned ON

2. Connect the plug from the power supply into the POWER jack on the TCG220‐Tdp, and

plug the power supply into an AC outlet.

Note: Use only the power supply that accompanied this unit. Using other adapters may

damage the unit.

3. Connect one end of the Ethernet cable to the Ethernet port of your computer, and the

other end to the ETHERNET port on the TCG220‐Tdp.

4. The TCG220‐Tdp will look for the proper cable modem signal in the Cable Television

network and process the initial registration. The voice gateway is ready for data transfer

after the LED "Cable Link" is lit solid green.

Note: The REBOOT button at the rear panel is for maintenance purposes only. You don't

need to use it.

Fig. How to set up your connection