Askle Sante Winncare VMA0-222-AC Руководство пользователя - Страница 2

Просмотреть онлайн или скачать pdf Руководство пользователя для Внутренняя отделка Askle Sante Winncare VMA0-222-AC. Askle Sante Winncare VMA0-222-AC 6 страниц. Viscoelastic foam mattress

Печатать страницу

RECOMMENDATIONS

The main way to prevent bedsores when in bed is to change the pressure points of the body on the mattress on average every three hours to limit

a too lengthy compression of the vessels opposite bone protuberances and to allow tissue irrigation. Do not tuck the bedlinen in too tightly to maintain

the efficiency of the mattress.

PRINCIPLE

The Alova mattress is a static mattress for the prevention and treatment of bedsores.

The low resilience Alova viscoelastic foam provides 3 different supports that reduce the contact pressure of the body on the support. A proclive

integrated into the surface of the Alova mattress on the part in contact with the lower limbs makes it possible to relieve the heels. The combination of

these principles improves blood circulation and minimises the pressure on bedsore prone areas.

INSTRUCTIONS

For patients with reduced mobility and "Average to High" bedsore risk (according to the Braden scale or any other valid scale and depending on the

physician's opinion). Helps to treat stage 1 to 2 bedsores according to EPUAP.

RECOMMENDATIONS FOR USE AND COUNTER INDICATIONS

There are no specific counter indications for the use and place of use. The mattress is designed to be installed on a medical bed frame at the location

designed to this effect. The mattress must be used with the delivered cover.

In the case of the use of a bed with side barriers, the minimum distance between the top of the mattress and the top of the barriers must be at least

22 cm. In the case of use of a bed with several functions, check the correct distribution of the support pressure.

TECHNICAL DATA

References

VMA62

VMA63

Sizes

195x88x14 cm

Density and resistance to

PU VE : 80kg/m³1.8 kPa

compression of the foam

PU HR :18kg/m³ 3.0 kPa

PU HR 26kg/m³ 3.0 kPa

Min and max patient weight

30 to 120 kg

30 to 150 kg

Materials used for the foam

mattress

Materials used for the cover

MAINTENANCE/DISINFECTION

Cover

Maximum authorised

Moderate wash at

chlorine concentration

90°C

5000ppm

The delivered removable cover is used to protect the mattress from all contamination by effluents. If the cover is deteriorated it is imperative to change

it and not to use the mattress without the cover. The cover can be washed and disinfected in a washing machine at 90°C. The cover can be disinfected

using current EC valid disinfectants (do not use corrosive products) The cover must not be ironed or tumble dried. The purpose of the cover is to limit

the risk of cross contaminations.

Item treated with a biocidal substance that is safe for the user. www.winncare.fr

PACKAGING AND INSTALLATION

The mattress is delivered with its zipped removable cover. The product is ready for immediate use. Place the mattress by orienting the label sewn to the

cover at the head or in compliance with the symbols on the top surface of the cover. The sheet must not be fixed to the mattress in order not to cancel

its effects.

The mattress must be installed with the viscoelastic material on the top.

The top part is marked and easily identifiable on the mattress. The cover is also marked. The heel relief part is indicated by a symbol representing feet.

(not the case for all covers)

PRECAUTIONS FOR USE

Avoid prolonged damp contacts with the foam.

Systematically protect the mattresses using rigorously dried delivered protection.

Prohibit all scouring, stripping products or solvents and "piercing-sharp" objects in direct contact with the cover.

REUSE

Before reusing for another person, clean and disinfect the mattress with a "detergent/disinfectant' product solution.

We recommend the replacement of the cover.

User Manual

Viscoelastic foam mattress

Products

VMA64

VMA0-222-AC

(ex VMA120XL)

VMA0-322-AC

(ex VMA140XL)

195x88x14 cm

195x117x17 cm

195x137x17 cm

PU VE : 80kg/m³1.8 kPa

PU VE : 85 kg/m³1.7 kPa

PU HR 34kg/m³3.5 kPa

PU HR 30kg/m³3.8 kPa

30 to 180 kg

30 to 150 kg

100% PU (43% VE and 57% HR)

Knit PES (except CIC with PA Knit) - coating PU

Drying with reduced

Do not iron

Do not dry clean

thermal constraints

PA0010115

MAINTENANCE

Regularly carry out a visual inspection of the condition of the foam: the presence of a visible collapse of the ALOVA material and an uneven and

very slow return to shape of the foam are the signs of wear criteria that compromise the properties of the support in helping to prevent bedsores.

Inspect the condition of the cover yearly to check the condition of the foam, the surface aspect of the cover and the closures (zippers). In order to

check for the absence of holes, tears or problems with the zippers, examine the outer surface in natural daylight.

CONDITIONS FOR USE AND STORAGE

The pneumatic supports with telescopic cells should preferably be stored flat, away from direct light and excessive humidity.

Temperature range

Humidity range

ELIMINATION OF MEDICAL WASTE

Do not dispose of the product outside dedicated areas.

WARRANTY

The warranty period for ALOVA mattresses is 3 years. The warranty begins on the purchase date from the distributor. In the case of a single patient use,

the warranty covers the support and its protection. In the case of multi patient use, the warranty period for the protection is reduced to 1 year.

This warranty does not cover normal wear and tear and is not a substitution of legal guarantees. Please contact your distributor and present the

incriminating product. The distributor will carry out the necessary procedure with our company in order to either repair or replace the product.

PRODUCT LIFE SPAN

The estimated life span of ALOVA mattresses is 6 years.

SUITABILITY FOR USE:

(max) Pressure in mmHg before ageing, using the maximum validated weight, measured flat (0°)

Reference

VMA Mattress + Promust PU cover

BAR Mattress + Promust PU cover

1 mattress

1 cover

1 set of instructions for use

VMA120BAR

VMA140BAR

195x117x17 cm

195x137x17 cm

PU VE : 82kg/m³ 2.2kPa

PU HR 41kg/m³ 4.5 kPa

135 àto270 kg

Use of an authorised

surface

detergent/disinfectant

product

Use

Storage

15°C – 45°C

-5°C – 60°C

30% - 70%

10% - 90%

Max. weight User

Head

150 kg

270 kg

130

Composition of the parcel

Buttocks

Heels