Asko ADA Series Руководство по установке - Страница 2

Просмотреть онлайн или скачать pdf Руководство по установке для Посудомоечная машина Asko ADA Series. Asko ADA Series 20 страниц.

INTRODUCTION

Read these instructions carefully and completely before

you install the machine. The installation should be

carried out by a qualified person who is familiar with all

local codes and ordinances for electrical and plumbing

connections.

TOOLS

1) Phillips No. 2 screwdriver

2) Flat blade screwdriver

3) Torx screwdriver size T 20

4) Adjustable wrenches (if you use copper fittings)

Open-ended wrench

(1/2˝ [12 mm], 5/8˝ [16 mm] and 1˝ [24 mm])

6) Tape measure

7) Spirit level

8) Electric drill with 1-1/2˝ drill bit

9) Keyhole saw

MATERIALS SUPPLIED

1-1/2"

(38 mm)

* Only select models.

MATERIALS

• Minimum 3/8" OD copper tubing of sufficient length

for your installation

• Shut-off valve and fittings for water supply line

AUTOMATIC HIGH LOOP

The drain hose is fastened to the back of the machine at the best height. To eliminate potential drain problems,

leave this hose in place.

3/8"

(10 mm)

(25 mm)

CUSTOMER CARE CENTER 1-800-898-1879 • WWW.ASKONA.COM

NOTE:

Cosmetic damage must be reported to the ASKO dealer

within five days from the date of purchase. As soon as

you unpack the dishwasher, thoroughly check it for

cosmetic damage.