Bluerock Tools PTK-300 Руководство по эксплуатации - Страница 5

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Инструменты Bluerock Tools PTK-300. Bluerock Tools PTK-300 20 страниц. Pipe threading kit for pd- 300/ptm-300

Печатать страницу

P T K - 3 0 0

P I P E

T H R E A D I N G

DO operate machine from side with REV/OFF/FOR switch. This eliminates the need to reach over the machine.

DO keep hands away from rotating pipe and fittings. Stop the machine before wiping pipe threads or screwing on

fittings. Allow the machine to come to a complete stop before touching the pipe or machine chucks. This practice will

prevent entanglement and serious injury.

DO tighten the chuck handwheel and engage rear centering device on the pipe BEFORE turning on the machine. This

will prevents oscillation of the pipe.

DO be mindful that power tools can expose an operator to vibrations transmitted through contact with the machine.

Prolonged exposure can lead to medical issues, which should be discussed with a medical professional.

DO NOT wear gloves or loose clothing when operating machine. Keep sleeves and jackets buttoned. Do not reach

across the machine or pipe. Clothing can be caught by the pipe or machine resulting in entanglement and serious

injury.

DO NOT use this machine if the foot switch is broken or missing. Foot switch is a safety device to prevent serious

injury.

DO NOT make adjustments to machine while the machine is running.

DO NOT cut or saw work-pieces by hand while the machine is running

DO NOT use dull cutting dies as the machine is more likely to bind and the user lose control. This can also overload

the motor.

DO NOT use excessively long pieces of pipe in the machine. Keep the machine balanced and stable at all times.

DO NOT leave the machine running when not in use.

DO NOT hold the work piece by hand or using body. Always mechanically clamp or secure work piece.

DO NOT allow liquids or dust to enter the machine's ventilation system.

DO NOT operate machine outside of machine specifications.

DO NOT touch moving parts while the machine is running as death or dismemberment could occur.

DO NOT remove machine's panels while machine is connected to a power source. Only to be removed for service by

qualified personal and put back on the machine after service is complete.

DO NOT allow children or untrained personal to operate machine.

DO NOT use this machine in the rain or a wet environment. If using outdoors, make sure the machine is dry.

DO NOT operate in the presence of explosive materials as power tools create sparks which may ignite dust or fumes.

DO NOT use on a pipe that may contain a live electrical wire/circuit.

DO NOT use this machine if the ON/OFF switches are broken.

DO NOT use this machine to make or break fittings. This practice is not an intended use of the machine and can

result in serious injury.

DO NOT operate the machine with covers removed. Exposure to moving parts may result in entanglement and

serious injury.

DO NOT operate this machine on the same work surface where welding is being performed. This could result in

severe damage to the machine or personal injury to the user.

DO NOT operate this machine on a lower voltage as this could limit the motor life and work efficiency.

NOTE: Use of long small gauge power extension cords can result in decreased voltage. As local voltages

can vary, it may be a good idea to test the voltage at the end of the extension cord to ensure proper voltage

requirements are met. You might also consult an electrician to make sure the length of cord matches up

with the proper wire gauge for this size motor. Make sure to use outdoor cords when operating outdoors.

Use a GFCI circuit if using in wet locations.

K I T