Bluerock Tools SL-1.25 Руководство по эксплуатации - Страница 15
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Электроинструмент Bluerock Tools SL-1.25. Bluerock Tools SL-1.25 18 страниц. Seam locker
Печатать страницу
S L - 1 . 2 5
S E A M
L O C K E R
General Maintenance
Ø
Inspect electrical cords and electrical connections.
Ø
Keep machine clean and free of debris. Clean motor ventilation slots as necessary.
Ø
Check for misalignment, binding and breakage of all moving parts. If damaged, repair tool before use.
Ø
Guide Rails of Machine:
Gearbox Service:
Ø
Occasional Maintenance
Ø
Have the power tool serviced by a qualified service technician using identical replacement parts.
Change motor brushes:
o
Changing out rollers. If any rollers are disassembled, reassemble using 24Nm or toque and use Loctite
o
262. If the slotted nut is disassembled, reassemble to 16Nm of torque and use Loctite 262.
Clean and oil guide rails on the machine after every 10hrs of use. Cleaning the guide rails
o
can be done with a steel brush. Oil to be used can be Universal Lubricating oil. Check for
misalignment, binding and breakage of all moving parts. If damaged, repair tool before use.
After 300hrs of use, gearbox grease should be replaced. G1 lubricating grease is
o
recommended.
1)
Disconnect machine from power.
2)
Take off motor handle housing.
3)
Unscrew left and right side brush holder caps.
4)
Take out old brushes.
5)
Replace with new brushes.
6)
Screw in brush holder caps tightly.
12
5
Chapter