D&R TelCom Руководство пользователя - Страница 5

Просмотреть онлайн или скачать pdf Руководство пользователя для Приемник D&R TelCom. D&R TelCom 20 страниц.

Back panel lay-out

RECEIVE

SEND

PHONE:

LINE (wall)

USER MANUAL

The D&R TelCom telephone Hybrid is designed to create an easy connection between the

public telephone line and your studio equipment.

The Hybrid has to be inserted between your telephone and the telephone line.

Connect the two wires of the telephone line's wall unit to the RJ-11 connector labeled

LINE (wall) and connect the telephone appliance itself to the Hybrid's phone output on the

RJ-11 connector labeled PHONE. This can be done with standard available cable assemblies

from your local phone shop.

Now the hybrid is interfaced (fully balanced) between your telephone appliance and its

connection to the outside world. The hybrid can now split the send and return signals.

Now connect the hybrid's balanced audio output labeled RECEIVE to a (preferable) balanced

input of around +4dBu.

The TelCom stereo jack or Cinch connector labeled SEND has to be connected to a line level

(cleanfeed) output of your mixing console.

This output has to be the mix of all signals except the signal coming from the hybrid itself to

avoid feedback. An Aux output will do, or in broadcast mixers a clean-feed is the best.

NOTE: The output of the Hybrid can be connected balanced via the jack connector or

unbalanced via the Cinch connectors.

(Please be aware that the jack interrupts the Cinch connection)

Balanced Stereo jack/Cinch output to be connected to line input of

a mixer.

Balanced Stereo jack/Cinch input to be connected to Mix

Minus/Clean feed (N-1) or Aux output of the mixer.

RJ-11 connector to connect with a telephone set.

RJ-11 connector to connect with the public telephone network.

Manual page 5