D&R 935-0049A Руководство по установке - Страница 2

Просмотреть онлайн или скачать pdf Руководство по установке для Крепление для телевизора D&R 935-0049A. D&R 935-0049A 2 страницы. Speaker bracket

INSTALLATION INSTRUCTIONS

Features

The Speaker bracket is designed to fit in front of the vehicle radiator centered behind

the vehicle grill.

Vehicle Preparation:

The front end molding must be removed from the vehicle to allow for installation of the

speaker bracket and speaker.

Speaker Bracket Preparation:

This product is shipped ready to install. Remove all items from the shipping packaging,

confirm contents by comparing with the packing list. Report any shortages or discrep-

ancies to D&R immediately. If the product was damaged in shipment notify the ship-

ping company within 48 hrs. Keep all packing material and

documents for presentation to the shipping company.

Speaker Bracket Installation:

The speaker bracket is designed for quick installation on the vehicle.

Note: This product is designed for installation on model year 2005 and newer

vehicles.

Basic Installation:

1. Remove the front end molding to expose the mounting location (Figure 1)

There are; 10 #7 Head Screws on the bottom edge

3 plastic rivets on each side that must be cut off

2 #10 Head screws at each side

8 clips along the top

Pop up a guide pin in the top corners and lift the front end molding off.

Figure 1

Right

2. Hold the bracket and sit it over top of the front bumper beam. With the back plate in

place at the back, insert a bolt and washer from the front and tighten on a washer,

lock washer and a nut. Do this in each of the 4 corners. Figure 1

Installing speaker

DRCS100 model speakers are installed using the side mounting arms. Refer to installa-

tion and wiring instructions included with the speaker for details

DR100R model speakers are installed using the four mounting holes in the rear of the

bracket. Refer to the installation instructions included with the speaker for details.