Asko WM25 Руководство по эксплуатации - Страница 6

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Стиральная машина Asko WM25. Asko WM25 16 страниц.
Также для Asko WM25: Руководство по эксплуатации (20 страниц), Руководство по эксплуатации (16 страниц)

Печатать страницу
Asko WM25 Руководство по эксплуатации
Service manual WM25

Indication of programme sequence

During the programme, the current programme sequence is indicated by a fixed light in the LEDs around the start/stop/door
open button (see the image).
Rinsing and spinning

Options and settings

Options
Settings
1400
1400
1000
1000
400
400
800
800
40
50
30
60
Cold
95
6
End
Final rinse
Increases the temperature and extends the time of the main wash
This option is only available on the American market.
White:
140°F / 170°F + approx 40 min
Colours:
105°F / 120°F + approximately 40 min
Permanent
105°F / 120°F + approximately 15 min
press:
Gives 2 – 4 extra rinses
This option cannot be selected with Wool/Hand wash, Rinse programme, Spin or Drain.
Delays the start of the machine by 5 hours
Activated by pressing the "Delayed start" button and then the start/stop button
The number 5 in the display indicates that Time-delayed start has been activated. The number of
hours to start is displayed with a countdown from 5 to 1.
Produces extra water in the main wash and rinses
Cannot be selected for wool/ hand wash, spinning and draining
It is possible to select spin speed between 400 and 1400 rpm, "No spin" and "No draining" (option
depending on machine type).
Spin at 400 – 800 rpm means a short spin.
For certain programmes, it is not possible to select a speed in excess of 800 rpm (see the table).
"No spin" means that the programme does not include a spin cycle and ends by draining.
"No draining" means that the programme does not include a spin cycle and ends with the water
from the final rinse still in the machine.
Possible to select temperatures between "Cold" and 95°C.
With "Cold" selected, the water in the machine is not heated.
Programme number 7 does not allow a temperature above 40°C to be selected.
Start
Heating up
Temperature reached