ACR Electronics RCL-600A - SCHEMA REV A Руководство по поддержке продукта - Страница 4

Просмотреть онлайн или скачать pdf Руководство по поддержке продукта для Заливающий свет ACR Electronics RCL-600A - SCHEMA REV A. ACR Electronics RCL-600A - SCHEMA REV A 12 страниц. Remote control searchlight system with joystick remote control panel
Также для ACR Electronics RCL-600A - SCHEMA REV A: Монтажный шаблон (1 страниц), Руководство по поддержке продукта (12 страниц), Руководство по поддержке продукта (12 страниц)

SECTION 1 - HOW THE SEARCHLIGHT WORKS

The RCL-600A was specially designed for mariners who require a high intensity remote controlled searchlight that can

stand up to the tough marine environment.

The RCL-600A is a xenon arc searchlight that produces six (6) million peak candle power. All functions of the RCL-600A

can be electrically operated by remote control from the pilot area of the vessel. A remote control panel is supplied with the

RCL-600A. An optional slave remote control panel is available (ACR Product No. 1942).

The sleek design and modern construction of the searchlight body makes it attractive for recreational and

commercial vessels. The searchlight is totally enclosed and is made of rugged aluminum alloy. It is gasketed and finished

to be resistant to the weather.

2.1 Unpacking the RCL-600A

Before proceeding with the installation of the RCL-600A, please verify that the content of the box includes the following:

Light housing with wires, 12V (Product number 1943), OR Light assembly,24V (Product number 1941)

RCL-600A xenon bulb (located inside packing foam)

Joystick

Product Support Manual

Instruction sheet for RCL-600 upgrade (for Product Number 1943),OR Instruction sheet for RCL-600 (for Product

Number 1941)

Warranty card

If any of the above is missing, please contact ACR Electronics' Technical Service by email at

or by phone at 1 (800) 432-0227. Please be ready to provide the serial number of your unit and location of purchase.

3.1

Wiring the unit

The RCL-600A Remote Control Searchlight consists of searchlight unit and a master remote control panel. The user must

supply the cable and/or wire to power the unit (see Appendix A for Cable Selection Tables). The source must be a fused

24 VDC, 10 amp supply (product number 1941) or a fused 12 VDC, 20 amp supply (product number 1943). This cable is

to be attached to the searchlight as shown in the connection diagram. See Figure 1.

CAUTION: Observe polarities when attaching wires!

Y1-03-0139F

service@acrelectronics,com