Ambient Weather WS-1171A Руководство пользователя - Страница 3
Просмотреть онлайн или скачать pdf Руководство пользователя для Погодная станция Ambient Weather WS-1171A. Ambient Weather WS-1171A 20 страниц. Advanced weather station
Печатать страницу
2.4 Display Console Set Up
Note: To avoid permanent damage, please take note of the battery polarity before inserting the
batteries.
Place the remote thermo-hygrometer about 5 to 10' away from the display console (if the sensor is too
close, it may not be received by the display console).
Remove the battery door on the back of the display. Insert three AA (alkaline or lithium, avoid
rechargeable) batteries in the back of the display console. Looking at the back of the unit (left to right),
the polarity is (+) (-) for the top battery, (-) (+) for the middle battery and (+) (-) for the bottom battery.
The display will beep once and all of the LCD segments will light up for a few seconds to verify all
segments are operating properly.
Replace the battery door, and fold out the desk stand and place the console in the upright position.
The console will instantly display indoor temperature, humidity, barometer, tendency, date and time.
The remote search icon will turn on in the OUT section of the display
and humidity will update on the display within a few minutes.
Do not touch any buttons until the remote sensor reports in, otherwise the remote sensor search
mode will be terminated and the search icon will turn off. When the remote sensor data has been
received, the console will automatically switch to the normal mode, and all further settings can be
performed.
If the remote does not update, please reference the troubleshooting guide in Section 7.
2.4.1 Radio Controlled Clock (RCC)
The RCC is received by the main console. After the remote sensor is powered up, the sensor will
transmit weather data for 30 seconds, and then the sensor will begin radio controlled clock (RCC)
reception and the RCC search icon
(maximum 10 minutes), no weather data will be transmitted to avoid interference.
If the signal reception is not successful within 1 minute, the signal search will be cancelled, the
outdoor temperature and humidity will update as normal, the RCC icon will turn off, and the RCC
Version 1.10
©Copyright 2013, Ambient LLC. All Rights Reserved.
Figure 1
will turn on.
During the RCC time reception period
. The outdoor temperature
Page 3