ACR Electronics OLAS GUARDIAN Тестирование
Просмотреть онлайн или скачать pdf Тестирование для Система безопасности ACR Electronics OLAS GUARDIAN. ACR Electronics OLAS GUARDIAN 2 страницы.
Также для ACR Electronics OLAS GUARDIAN: Краткое руководство по эксплуатации (16 страниц), Устранение неполадок (2 страниц)
Печатать страницу
Testing the alarm
1. Connect the OLAS app to the Guardian. For more
information on how to do this please refer to the
Guardian Setup Instructions.
3. Switch off the OLAS transmitters.
OLAS tag: press the button for 4 seconds, until a red flash
is seen. OLAS Float-On: press the button for 4 seconds
until the bicolor LED flashes red.
5. Press the Guardian's control switch once or tap
"Continue to Recovery" in the App. This puts the system
into pause state.
MOB
Tom
Overboard!
OR
Step 1
Press and hold the MOB button
on your GPS Chart Plotter
Step 2
Send a MOB DSC alert
using your VHF
Continue to recovery
www.acrolas.com
0438
Near
1152
Near
0347
Near
MOB
2. Ensure all OLAS transmitters are seen on the OLAS app
homescreen.
4. The alarm will occur after your set 'Alert Time' and the
engine will cut out. The default Alert Time is 2 seconds.
6. Press the control switch again once. 3 beeps will sound
to indicate that the transmitter is still missing, and the
system is still in pause state.
0438
0347
Tom
Overboard!
Step 1
Press and hold the MOB button
on your GPS Chart Plotter
Step 2
Send a MOB DSC alert
using your VHF
Continue to recovery