ambiq micro Apollo3 Blue Plus Краткое руководство по эксплуатации - Страница 12
Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Материнская плата ambiq micro Apollo3 Blue Plus. ambiq micro Apollo3 Blue Plus 15 страниц.
Apollo3 Blue Plus EVB Quick Start Guide
Ultra-Low Power Apollo MCU Family
As an example for setting the jumpers on P19, Figure 7 shows the EVB configured for 3.3V operation with
jumper across VDD_PS and VDD_MCU for no current measurement.
Figure 7. Header P19 Configured for 3.3V Operation - No Current Measurement
Figure 8 shows the EVB configured for 3.3V operation with current measuring leads across VDD_PS and
VDD_MCU for current measurement.
Figure 8. Header P19 Configured for 3.3V Operation - With Current Measurement
Measuring the current consumption of the target MCU on the board using equipment with a sensing
resistor will create a burden voltage over the resistor on VDD_MCU. In some cases the burden voltage
may be too high and may cause a brown-out event on the target MCU at 1.8V. SB1 on the board can be
QS_A3P_1p1
Page 12
2020 Ambiq Micro, Inc.
All rights reserved.