ambiq micro Apollo4 Blue EVB Краткое руководство по эксплуатации - Страница 7

Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Сетевое оборудование ambiq micro Apollo4 Blue EVB. ambiq micro Apollo4 Blue EVB 20 страниц. Evb display kit
Также для ambiq micro Apollo4 Blue EVB: Краткое руководство по эксплуатации (18 страниц)

3.

Reference Documents and Software

The following items, which can be downloaded from the Apollo4 Product Page link on https://ambiq.com/,
may be useful in understanding and using the EVB.
▪ EVB Schematic
▪ Datasheet
▪ Programmer's Guide
▪ Errata List
▪ AmbiqSuite SDK
4.

Quick Start

The EVB Kit comes with the following items:
▪ Apollo4 Evaluation Board (EVB), revision 3
▪ USB Type C cable
▪ Four adhesive-backed rubber feet
▪ Extra jumpers
Caution: The EVB has components loaded on the back of the board. Care should be taken to not damage
these components. The included rubber feet should be applied to the bottom of the board to prevent direct
contact between the components and a desk surface.
The EVB comes with jumpers pre-configured for default operation. Also, it has been pre-programmed with
the Binary Counter example program. To start EVB program execution, connect the USB-C cable from a
USB port on a PC to the J-Link USB connector (J6) on the EVB, and turn on the power switch (SW4). The
blue LED under the power switch should illuminate.Monitor the three LEDs on the bottom of the EVB (D3-
D5). The LEDs should light in a binary count-up pattern, and repeat.
The AmbiqSuite SDK provides many example programs that may be run on the EVB. To run these
examples, download the SDK via the link provided above and select any of the pre-built examples in the
SDK at /boards/apollo4b_bga_evb/examples.
QS-A4-4p1
Apollo4 EVB Quick Start Guide
Page 7
2023 Ambiq Micro, Inc.
All rights reserved.