ACR Electronics FPR-10 PROGRAMMER Ürün Destek Kılavuzu - Sayfa 3

Aksesuarlar ACR Electronics FPR-10 PROGRAMMER için çevrimiçi göz atın veya pdf Ürün Destek Kılavuzu indirin. ACR Electronics FPR-10 PROGRAMMER 15 sayfaları. Field programmer reader

Sayfayı Yazdır

1.0

OVERVIEW

The FPR-10 (Field Programmer Reader – 10) is designed to be both a re-

programming and verification tool for the ACR Satellite 406 RLB-32, RapidFix

406 RLB-33, GlobalFix 406 RLB-35 and GyPSI 406 PLB-100.

Programming the beacons specified above is accomplished with a programming

head. Each beacon type has a unique programming head. The GlobalFix 406

RLB-35 programming head is integrated into the FPR-10. In order to program

different types of beacons, only the programming heads have to be changed. When

a user wants to re-program a beacon, he/she is guided through a series of questions

to determine the information that will be entered into the beacon.

Verification of the beacon' s message is accomplished by the Memory Read

function. This mode allows the user to read the beacon' s memory containing the

UIN (Unique Identifier Number) also referred to as Hexidecimal Identification

Label. When a user selects the Memory Read option, the nonvolatile memory

contents are sent to the PC. The PC then displays the message and date that the

beacon was programmed.

The order in which the screens appear on the PC are the same regardless of the

product chosen. After seeing the opening screen with the ACR logo and other

information, the user will choose FPR-10 or FPR-100 depending on the type of

FPR hardware being used. Next, the user will see the Product Selection Menu.

After choosing the product, there will be a Model Selection screen if there is more

than one model of the desired beacon. The user will then be guided to the Option

Selection Menu where he or she may choose the action to be performed. If a

mistake is made, the user can return to the previous screen by choosing the Back

button on each form. The user can exit the program at any time using the Exit

button and return to the operating system. Refer to figures 1 – 4 for explanation of

the different menus.

In order for all screens of the FPR-10 to be seen in their entirety, the screen

resolution must be 800 x 600. When the FPR-10 is started the resolution is

automatically changed to 800 x 600. If the program is exited through the Exit

button the screen resolution will return to its original values. If the program is

exited improperly (i.e. Run time error), the resolution will remain at 800 x 600.

The resolution can be changed through the display option of the Control Panel in

your Windows™ operating system.

2.0

WARNINGS

To test whether an EPIRB or PLB operates satisfactorily, always perform a self-test

as described in the beacon' s operating manual or contact the beacon manufacturer

for instructions as to how to perform a self-test.

Y1-03-0164 Rev. A