Ambirad VISION VSXE35UT Montaj ve Kullanım Kılavuzu - Sayfa 3

Isıtıcı Ambirad VISION VSXE35UT için çevrimiçi göz atın veya pdf Montaj ve Kullanım Kılavuzu indirin. Ambirad VISION VSXE35UT 8 sayfaları. Radiant tube heaters

Sayfayı Yazdır

2. Assembly Instructions.

PLEASE READ this section prior to

assembly to familiarise yourself with the

components and tools you require at the

various stages of assembly. Carefully open the

packaging and check the contents against the

parts and check list.

The manufacturer reserves the right to alter

specifications without prior notice.

2.1

Tools Required.

The following tools and equipment are advisable to complete the tasks laid out in this manual.

Suitable alternative tools may be used.

Trestles

Wrench with

Extension

2.2

Assembly notes.

Please read these assembly notes in

conjunction with the correct assembly

drawings (figs 1 to 3).

2.2.1 Tubes

Identify and position tubes on trestles. For

aesthetics it is advisable to position the tube

seam and coupling fastener so that these

cannot be seen from beneath the heater.

For the 50kW U tube only there are

extension radiant tubes. Join these to the

main tube assembly using couplers as detailed

in section 2.2.4

Mark out the position of the bracket centres

from the dimensions shown on the assembly

drawings.

2.2.2 Turbulators (where fitted)

Insert turbulator(s) into tube(s) ensuring the

correct length and quantity are inserted into

their respective correctly identified tube(s) as

detailed in the assembly drawings.

Please ensure that all packaging is

disposed of in a safe environmentally

friendly way.

For your own safety we recommend the

use of safety boots and leather faced

gloves when handling sharp or heavy items. The

use

recommended.

Leather

Faced

Gloves

13mm

Socket

2.2.3 Brackets

There can be three types of brackets supplied

with these heaters:

•

Type 'A' are suspending brackets with

reflector fixing points.

•

Type 'B' are suspending brackets with no

fixing points.

•

Type 'C' is a centre bracket to retain the

reflector. (certain models only)

Slide the bracket assemblies along to the tubes

to the marked positions in their correct order as

detailed in the assembly drawings. Tighten

clamping 'U' bolt arrangement to tubes ONLY

WHERE STATED on the assembly drawings.

2.2.3.1 Tube alignment sections For

VSXE50UT Angle Mounted Installations

ONLY.

To allow for differential expansion of the tubes,

a tube alignment assembly is fitted to the first

protective

eye

Pozidrive

Screwdriver

Tape

Measure

wear

also

10mm,

12mm &

13mm

Spanners

4 & 5mm

Allen

Keys