Ambirad Vision VSX Servis ve Devreye Alma Kılavuzu - Sayfa 13

Elektrikli Isıtıcı Ambirad Vision VSX için çevrimiçi göz atın veya pdf Servis ve Devreye Alma Kılavuzu indirin. Ambirad Vision VSX 14 sayfaları. Radiant tube heaters

Sayfayı Yazdır

6.3 Gas Valve Replacement

Step 1 Remove the burner assembly as

described in the section 4.3 Servicing.

Step 2 Open the left hand access door and

detach the impulse hoses from the air pressure

switch.

Step 3 Remove the 4 screws holding the burner

head onto the burner assembly and carefully

pull burner head assembly from housing.

Step 4 The burner head can now be detached

by disconnecting the impulse tube and the

burner head wiring.

Step 5 From within the combustion chamber,

remove the two screws holding the front of the

gas valve.

Step 6 Turning the housing over, remove the

four screws holding the rear burner plate in

position.

Step 7 Open the two side doors and remove the

rear plate assembly.

Step 8 Whilst the valve is still attached to the

plate, the jet carrier, gas inlet, and wiring

harness can now be detached from the gas

valve.

Step 9 The two screws retaining the gas valve

can then be removed.

Step 10 The gas valve can now be replaced.

Step 11 Refit all components in reverse order.