ACR Electronics PATHFINDER 3 Ürün Destek Kılavuzu - Sayfa 10

Deniz Telsizi ACR Electronics PATHFINDER 3 için çevrimiçi göz atın veya pdf Ürün Destek Kılavuzu indirin. ACR Electronics PATHFINDER 3 19 sayfaları. Search and rescue transponder (sart)
Ayrıca ACR Electronics PATHFINDER 3 için: Manuel (20 sayfalar)

Sayfayı Yazdır
7.0

Pole Mounted SART

1. The PathFinder
sea level (see figure 5).
2. To operate, simply turn the bottom cap of the SART to release the pole.
3. Pull the pole downward and extend it to its maximum length.
4. To lock pole in position pull firmly across pole joints while twisting slightly.
5. Tie Lanyard to life raft to allow retrieval should the SART fall into the water.
6. Push SART through life raft observation port and place foot of pole in pocket at base of
life raft.
7. Use life raft ties to hold SART pole near vertical.
8. Ensure SART is not obscured by metal objects or inflatable Radar reflectors.
9. Periodically check to see if SART is still vertical.
TM
is supplied with a telescopic pole to raise the SART one meter above
3
Figure 5
10
1 Meter
Minimum
Y1-03-0170 Rev. B