AMC A200 Kullanıcı Kılavuzu - Sayfa 6
Amplifikatör AMC A200 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AMC A200 8 sayfaları. A series
Ayrıca AMC A200 için: Kullanıcı Kılavuzu (7 sayfalar), Kullanıcı Kılavuzu (8 sayfalar)
Sayfayı Yazdır
Specifications
Stereo Mode (both channels driven)
Continuous average output power per
channel
4Ω / EIA 1 kHz / 0.1% THD
8Ω / EIA 1 kHz / 0.1% THD
Input Sensitivity at 8Ω
Input Impedance
Frequency Response
Distortion (SMPTE-IM)
Signal to Noise Ratio (20 Hz - 20 kHz) 8Ω
Damping Factor (1 kHz and below)
General specifications
Amplifier Protection
Load Protection
Controls
Indicators
Connectors (each channel)
Power Requirements
Fuses
Dimensions (HxWXD)
Weight - Net
The specifications above are correct at the time of printing of this manual. For improvement purposes, all
specifications for this unit, including design and appearance, are subject to change without prior notice.
A100
100 W
70 W
0.775 Vrms (0 dBu)
10
25 Hz - 25 kHz: +0/-1 dB
(5 Hz - 50 kHz:-3 dB points)
Full short circuit, open circuit, thermal, ultrasonic, RF
protection. Stable into reactive or mismatched loads
Turn-on/off muting, current limiter
Front: AC switch, channel 1 & 2 gain knobs
Power-on: Blue LED / Signal: Green LED (1 per channel)
/ Clip: Red LED (1 per channel) Protect: Red LED
Input: unbalanced 1/4" (6.3mm) TRS
Output: Speakon
Selectable: 115V AC 60Hz / 230V AC 50Hz
AC115V:T4A/250V
AC230V:T2A/250V
45x482x320mm (1.73"x19.0"x12.6")
8.0 kg
A200
200 W
130 W
Ω
unbalanced
< 0.03%
> -100 dB
> 400 at 8Ω
AC115V:T10A/250V
AC230V:T5A/250V
8.3 kg