AMC iAC Kullanıcı Kılavuzu - Sayfa 9
Amplifikatör AMC iAC için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AMC iAC 14 sayfaları.
Sayfayı Yazdır
Rotary/push encoder
Rotary/push encoder
Rotary/push encoder
Operation
Menu system
Menu system
In normal operating mode
In normal operating mode
LCD shows volume of each channel
LCD shows volume of each channel
Menu system
One Knob To Control Everything
In normal operating mode
iAC serie features a graphic LCD display and a single rotary/push encoder allowing easy control of all device parameters.
LCD shows volume of each channel
nel
3 band EQ
3 band EQ
EQ adjustments can be made for each
EQ adjustments can be made for each
channel individually
channel individually
Push and hold the rotary encoder to enter the main menu and access more controls of parameters.
3 band EQ
Muting
EQ adjustments can be made for each
each
Each channel can be individually muted
channel individually
Single channel (bridge) mode
Single channel (bridge) mode
Muting
Muting
Muting
uted
Keep current channel settings when
muted
Keep current channel settings when
Each channel can be individually muted
Each channel can be individually muted
Each channel can be individually muted
entering single channel (bridge) mode
entering single channel (bridge) mode
Single channel (bridge) mode
e
Locking
muted
Keep current channel settings when
hen
Allows locking front panel controls to
entering single channel (bridge) mode
mode
prevent unauthorised access.
Active stand by mode
Active stand by mode
Device can be activated with user input or
Device can be activated with user input or
RS-232 command
RS-232 command
Active stand by mode
Device can be activated with user input or
put or
RS-232 command
05
Menu system
In normal operating mode
LCD shows volume of each channel
Menu system
Menu system
Menu system
In normal operating mode
In normal operating mode
In normal operating mode
LCD shows volume of each channel
LCD shows volume of each channel
LCD shows volume of each channel
3 band EQ
EQ adjustments can be made for each
channel individually
Menu system
In normal operating mode, LCD shows the volume of each channel. Push the rotary encoder to enter the other
3 band EQ
3 band EQ
3 band EQ
channel or back to the previous mode.
EQ adjustments can be made for each
EQ adjustments can be made for each
EQ adjustments can be made for each
channel individually
channel individually
channel individually
Single channel (bridge) mode
Keep current channel settings when
entering single channel (bridge) mode
Muting
Locking
Locking
Single channel (bridge) mode
Single channel (bridge) mode
Single channel (bridge) mode
Allows locking front panel controls to
Each channel can be individually muted.
Allows locking front panel controls to
Keep current channel settings when
Keep current channel settings when
Keep current channel settings when
prevent unauthorised access.
prevent unauthorised access.
entering single channel (bridge) mode
entering single channel (bridge) mode
entering single channel (bridge) mode
Sync Settings
Locking
Active stand by mode
The function allows to link both channels and copy settings from one channel to another in order to control both amplifier
Allows locking front panel controls to
Device can be activated with user input or
channels at once.
prevent unauthorised access.
RS-232 command
Lock
This function locks front panel control in order to prevent unauthorized access to the amplifier control menu or volume adjusting.
Active stand by mode
Active stand by mode
Active stand by mode
To disable the function press and hold the rotary encoder for 5 seconds. Lock function affects front panel control only, serial
Device can be activated with user input or
Device can be activated with user input or
Device can be activated with user input or
control and reset functions are not free of locking. Lock mode can be also enabled or disabled by using RS232 command.
RS-232 command
RS-232 command
RS-232 command
Active stand by mode
Mutes amplifier and turn off LCD display in order to save power. This mode is indicated by the red color LED inside the
power button. In order to disable standby mode turn or push the rotary encoder. The standby mode also can be enabled or
disables by using the RS232 command.
Locking
Allows locking front panel controls to
prevent unauthorised access.
Locking
Locking
Locking
Allows locking front panel controls to
Allows locking front panel controls to
Allows locking front panel controls to
prevent unauthorised access.
prevent unauthorised access.
prevent unauthorised access.
USER MANUAL
3 band EQ
EQ adjustments can be made
for each channel individually.
iAC Installation Power Amplifier
07