AMC MMA 60 Kullanıcı Kılavuzu - Sayfa 9

Amplifikatör AMC MMA 60 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AMC MMA 60 18 sayfaları.

Choosing right wire diameter and connectors

For output connector we recommend using pre-built or professionally wired high quality and heavy

gauge speaker wires. You may use Phoenix blocks for your output connectors.

To prevent the possibility of short-circuits, wrap or insulate exposed loudspeaker cable connectors.

Using the guidelines below, select the appropriate size wire based on the distance between amplifier and

speaker. The wire sizes are given for a 4 Ω load.

NOTE : Custom wiring should only be performed by qualified personnel.

CAUTION : Never use shielded cable for output power wiring

Distance

Up to 25 ft.

25 - 40 ft.

40 - 60 ft.

60 -100 ft.

100 - 150 ft.

150 - 200 ft

Figure shows connector pin assignments for wiring

High-Z Speaker Output

(7,5 m)

(7,5 - 12 m)

(12 m - 18 m)

(18 m - 30 m)

(30 m - 45 m)

(45 m - 60m)

Wire size

16 AWG (Ø 1,29mm)

14 AWG (Ø 1,62mm)

12AWG (Ø 2,05 mm)

10AWG (Ø 2,5 mm)

8AWG

(Ø 3,2 mm)

6AWG

(Ø 4,11 mm)

Low-Z Speaker Output