AMC XIA150e Kurulum ve Kullanım Kılavuzu için Talimatlar - Sayfa 7

Amplifikatör AMC XIA150e için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Kılavuzu için Talimatlar indirin. AMC XIA150e 17 sayfaları. Stereo integrated amplifier

Sayfayı Yazdır

INPUTS

All audio Inputs and tape outputs are via

gold plated RCA type phono connectors.

All the phono sockets on your AMC

amplifier are marked "L" for left and "R"

for right channels, with the left channels

nearer the top of the cabinet.

connection leads will have a white or

black plug for left, and a red plug for right.

1. OPTION INPUT (PHONO, COAXIAL,

OPTICAL IN)

PHOTO INPUT

The input is suitable for moving magnet

(MM) & Moving Coil (MC) cartridges. To

switch between MM & MC, please open

top cover and switch the MM/MC switch

on PHONO Module to the position you

will like to select. The PHONO Module is

located behind OPTION INPUT RCA

Jacks fixed to the side chassis. The plugs

on your turntable lead should be

connected to the Phone input sockets on

the rear panel of your amplifier.

COAXIAL/OPTICAL INPUT

A M C 2 4 b i t / 1 9 2 K H z D A C M o d u l e ,

MD1108s, can replace PHONO module to

have digital input in XIA100e/XIA150e.

The Coaxial/Optical switch can select

digital soruce.

2. iPod/DAC INPUT

The iPod/DAC input is suitable for use

with any iPod/DAC player. Connect your

iPod/DAC using the RCA sockets marked

iPod/DAC.

3. CD INPUT

The CD input is suitable for use with any

CD player. Connect your CD player to he

amplifier using the RCA sockets marked

"CD".

4. TUNER INPUT

The Tuner input is suitable for use with

most AM/FM, DAB+, Internet tuners.

Connect your tuner to the amplifier using

the RCA sockets marked "TUNER".

Your

5. VIDEO INPUTS

The video input is suitable for most TV's

with an audio output. Connect your TV

using the RCA sockets marked "VIDEO."

6. RECORD OUTPUT

This output is suitable for use with most

Audio or video recorders.

Connect the "record" leads of your

recorder to the RCA sockets marked

"RECORD" on the rear of your amplifier

using RCA/RCA leads.

7. AUXILIARY INPUT

The Auxiliary input is suitable for use with

any extra source processing a line level

output, perhaps a second tuner or media

player, or an additional video source

wired for replay only.

8. PRE OUT/MAIN IN

Normally the preamplifier and power

amplifier sections of this unit are

connected together via factory-installed

U-shaped metal jumpers that bridge the

PRE-OUT and MAIN-IN jacks. Check to

be sure that they are fully inserted into

the jacks and that nothing is touching

them.

By switching OFF the power and

removing the metal jumpers, you can

connect a signal processor such as a

surround-sound decoder or an electronic

crossover in the path between preamp

and power amp. Connect a cable from

PRE-OUT to the processor's input and a

second cable from the processor's output

to MAIN IN.