AMC iLive X2 Kullanıcı Kılavuzu - Sayfa 13

Mikrofon sistemi AMC iLive X2 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AMC iLive X2 16 sayfaları. Uhf wireless system

Troubleshooting

Problem

No indication on receiver

Audio signal distortion, extra noise

solutions

No RF signal

RF signal available but no audio signal

Unable to turn on transmitter

Solution

Make sure AC adapter is securely plugged

into electrical outlet and in to DC input

connector on rear panel of receiver

Remove the RF interference sources near

by receiver and transmitter (such as CD

players, computers, Digital devices,

earphones monitoring system) Receivers

and transmitters should be set at the same

frequency. Change receivers squelch level.

Make the distance smaller between

receiver and transmitter.

Transmission frequency should be the

same as the receiving frequency, or make

sure the transmitter is not out of range.

Check microphone status. Maybe

microphone power switch is on the mute

position.

Replace transmitter batteries