amc VIBRO AV MONITOR 1002DX Kullanıcı Kılavuzu - Sayfa 4
Ölçüm Cihazları amc VIBRO AV MONITOR 1002DX için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. amc VIBRO AV MONITOR 1002DX 16 sayfaları. Condition monitoring system with relay outputs
Sayfayı Yazdır2. Front panel description
4
Measurement chain diagnostics for IEPE
»
sensor:
Red LEDs
(inactive for DT version):
open - open circuit or sensor
short - short circuit or sensor
Indicator of the selected
»
estimate:
Green LEDs:
RMS – RMS value of vibration
PEAK – maximum value of vibration signal
Indicator of the selected measured
»
value:
Green LEDs:
acc –
vel –
Alarm outputs indicators:
»
Red LED:
ALARM – the alarm threshold exceeded, alarm
ON
Yellow LED:
WARNING – the warning threshold exceeded,
ON
Proper work indicator:
»
Green OK LED:
diode pulsing with frequency of 1 Hz indicates the
correct operation of the
rapid pulsing of diode means entering the device setup
menu
Keyboard:
»
UP –
DN -
SET -
Measured value:
»
double-digit LED
acceleration
velocity
device
up
down
set
display
failure
failure
signal
(0-Peak)
output
warning
AV MONITOR 1002DX