amc VIBRO AV ACQUISITION 4001 Kullanıcı Kılavuzu - Sayfa 8

Kontrol Ünitesi amc VIBRO AV ACQUISITION 4001 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. amc VIBRO AV ACQUISITION 4001 11 sayfaları. 4-channel data acquisition module with gain

Sayfayı Yazdır

7. InstaCal

To install the InstaCal utility software run the Icalsetup.exe file

located in the /InstaCal/ folder on the supplied CD. The software

will request permission to unpack and to install. Click OK and Setup

in a sequence of windows that will appear to access the installer

window. Then click the Next button twice (without changing the

access path) to confirm that you wish to launch installation and then

click Install.

When installation is complete, click the Finish button to close the

installer window. Restart the computer to apply the changes.

After the restart run the InstaCal software (Start > All programs > Measurement Computing > Instacal)

when the AVA module is connected to the computer. A window will appear with a list of measurement

cards which have been detected. Mark the item named USB-1608FS, click OK and close InstaCal.

The above procedure should be carried out once before using the data acquisition module for the

first time in data acquisition software.

8. DASYLab® 16 configuration

Before starting to work with the AVA module in DASYLab®, it

need to be configured properly in the Configurator (by default:

Start > All programs > DASYLab > Configurator). In the program's

window, in the Packages tab, the Measurement Computing option

should be marked. If it is not marked, please mark it, and click the

Enable button to launch the installation of drivers in DASYLab®.

In a sequence of windows that will appear, click Next, Next, Install

and Finish respectively.

The above procedure should be carried out only once when

using the module for the first time.