AMCI SD17060B-25 Kullanıcı Kılavuzu - Sayfa 19

Servo Sürücüler AMCI SD17060B-25 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AMCI SD17060B-25 20 sayfaları. Stepper drives

USING OLDER SD17060B-24 DRIVERS

Applicable Units

This appendix applies to all SD17060B-24 drivers. The SD17060B-24 has internal current limiting resistors

on its inputs and can only be used in 24Vdc systems. The SD17060B-24 was phased out of production in

December of 2008 and replaced by the redesigned SD17060B.

Replacing a SD17060B-24

A SD17060B-24 can be replaced by a SD17060B without changes to the system as long as the SD17060B

was manufactured after December of 2008. If the SD17060B was manufactured prior to the second half of

December 2008, you will have to add current limiting resistors to the circuit before using the SD17060B. See

Appendix A on the previous page for more information.

20 Gear Drive, Plymouth Ind. Park, Terryville, CT 06786

Tel: (860) 585-1254 Fax: (860) 584-1973 http://www.amci.com

APPENDIX B