Amcor AMB12KE410A Kullanım Kılavuzu - Sayfa 8

Klima Amcor AMB12KE410A için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Amcor AMB12KE410A 12 sayfaları. Portable

Drainage

During the process of cooling, some water

will be extracted from the air into the unit. If

the water container inside the unit is full, the

unit will stop, the fan will continue to circulate

the air. The POWER-LED will blink to inform you

to empty the internal container. To make the

cooling function work again, please empty the

water by one of the following methods:

1. Turn OFF the unit.

2. Position the supplied plastic water tray flat

on the floor under the drain hole.

3. Remove the drain knob and the rubber plug

from the drain hole. The condensed water will

drain out automatically.

4. When the water tray is almost full, replace

the rubber plug into the drain hole to stop the

water. Empty the water tray.

Rubber plug

Drain knob Water tray

5. Repeat steps 2, 3 and 4 until all the

condensed water is emptied.

6. One all the condensed water has been

removed, replace the rubber plug into the

drain hole firmly. The 'Tank Full' indicator

should be off now.

7. Replace the drain knob.

1. Remove the drain knob and rubber plug

and keep them for future use.

2. Connect the supplied water tube to the

water hole. The condensed water will drain

out automatically.

3. If you want to extend the water tube, you

can connect it with another tube (outside

diameter 18 mm).