Flock Audio PATCH LT Hızlı Kurulum Şeması - Sayfa 2
Kayıt Ekipmanları Flock Audio PATCH LT için çevrimiçi göz atın veya pdf Hızlı Kurulum Şeması indirin. Flock Audio PATCH LT 2 sayfaları. Setting up your patch model for the first time
Ayrıca Flock Audio PATCH LT için: Bağlantı (7 sayfalar), Kullanıcı Kılavuzu (20 sayfalar)
Sayfayı Yazdır
QUICK SETUP DIAGRAM
SETTING UP YOUR PATCH MODEL FOR THE FIRST TIME
SETUP & LABELLING DIAGRAM
B
PATCH
(Input)
&
(Output)
Linked/Combined
A
PATCH
(Input)
PATCH
(Output)
C
PATCH
Stereo Pairs
Hardware Setup Menu Labelling should show as above in-order to
properly allow your PATCH System to route audio signal flows.
Hardware Setup Menu
www.flockaudio.com
Unlinking Digital Rack Spaces allows the Inputs & Outputs to be separately routed for additional flexibility.
A
Note: When Unlinking Digital Rack Spaces, there will be (2) Digital Rack Spaces populated in the Hardware Index. The
Top
will be the PATCH (Input) and the
Linked Digital Rack Spaces will allow the Inputs & Outputs to be routed with only 1 Single Digital Rack
B
Space Representing both the Input & Output when routing in the Active Routing Grid.
C
Stereo Pairing can be achieved by selecting the "Pair" Icon any multiple corresponding Input and Output
Channels. More about "Stereo Paring" can be found in the PATCH Series User Manual.
Example Routing
Converter Output to Converter Input Routing
This example shows a simple Converter (Output) to
Converter (Input) PATCH APP Routing. This routing will
allow a user to send audio Out from their Converter
(DAW) and back In to their Converter (DAW)
Unlinking/Unlocking
Bottom
will be the PATCH (Output)
Linked/Locked
Stereo Pairing
Example Routing
#1
Microphone to Converter Input Routing w/
Additional Signal Processing
This example shows a Microphone with Additional
Processing between the Audio Signal Source and the
Converter (DAW).
NOTE: Externally connected Preamp 48V Phantom Power cannot be passed
through the PATCH System Series.
@flockaudio
#2