Amcor AM-45 Kullanıcı El Kitabı - Sayfa 6

Hava Temizleyici Amcor AM-45 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Amcor AM-45 10 sayfaları. Amcor inc. owner's manual air purifier am-45

Sayfayı Yazdır

How the Air Purifier Works

Control Panel and Remote Control Operation

1. Plug the unit into a 120V mains outlet and press the POWER (A)

button. The unit will start operating in the lowest speed.

The UV lamp and Ionizer will be on. Note that these are always

the initial conditions when the unit has been disconnected

from the 120V mains power. If the unit is turned on while

having remained connected to power, it will turn on with the

same UV lamp and Ionizer settings as when it was turned off.

The speed setting will also be kept, if the unit is turned on with

the TIMER (B) button or Remote Control.

2. With each press on the POWER (A) button, the unit will cycle

through the following sequence:

Speed 1 (Lowest speed), Speed 2, Speed 3, Off, Speed 1...

The selected speed will be indicated by the green light next

to the "1", "2", or "3" printing.

3. With each press on the IONIZER (C) button, the Ionizer will

cycle on and off. When the Ionizer is on, the green light next to

the IONIZER (C) button is lit.

4. With each press on the UV (D) button, the UV lamp will cycle on

and off. When the UV lamp is on, the green light next to the UV

(D) button is lit.

5. The Timer functions, which are controlled by the TIMER (B) button,

are as follows:

a. With each press on the TIMER (B) button, the Timer will cycle

through the following sequence:1hr, 2hrs, 4hrs, 8hrs, Timer off

(but the unit keeps operating), 1hr...The selected Timer interval

(in hours) will be indicated by the green light next to the

"1", "2", "4" or "8" printing.

b. The unit will operate for the selected Time interval (1 hr, 2 hrs,

4 hrs or 8 hrs) and then turn off the unit. After the appropriate

time period has passed the green light will move to the next

lower position in order to show the remaining time.

6. The Remote Control turns the unit on and off (see point 1 above).

For long operating distance the Remote Control should be pointed

at the area just below the POWER (A) button.

D: UV

C: IONIZER

B: TIMER

A: POWER