Amcrest AMC4KBC28-B-V2 Kullanıcı Kılavuzu - Sayfa 6

Güvenlik Kamerası Amcrest AMC4KBC28-B-V2 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Amcrest AMC4KBC28-B-V2 9 sayfaları. 4k analog hdcvi bullet camera

Sayfayı Yazdır

Most Amcrest DVRs will require you to set the camera to HD-CVI or Analog (960H) settings and may not be

compatible with HD-TVI or AHD. Ensure your 4-in-1 camera's toggle switch is set to the proper setting as indicated

in the diagram below.

Note: If the proper mode configuration is not set, you will not be able to view your camera on your DVR. Please

make sure you have the proper settings on your camera before you begin setting up or installing.

To install your Amcrest 4-in-1 camera, please follow the steps provided below:

Note: Make sure you have the proper mode configuration on your camera before running or connecting any

cables. Refer to the Figure 1-1 for more details on how to set mode configurations for your specific DVR.

Step 1: Connect a BNC (coaxial) cable to the video out connection of your camera.

Step 2: Connect the male end of the DC power connector of the BNC (coaxial) cable to the female end of the

power connector of the camera.

Step 3: Connect the BNC (coaxial) cable to a video out channel on the back of your DVR.

Step 4: Connect the male end of the DC power connector of the power adapter to the female end of the power

connector of the BNC (coaxial) cable. Plug in the power adapter to apply power to the camera.

Technical Specifications

Model

Camera

Image Sensor

Effective Pixels

Electronic Shutter Speed

S/N Ratio

Minimum Illumination

IR Distance

IR On/Off Control

IR LEDs

Pan/Tilt/Rotation Range

Figure 1-1

AMC4KBC28-B-V2

1/2.7-inch CMOS

3840(H)×2160(V), 4K

PAL: 1/25s-1/100000s, NTSC: 1/4s-1/100000s

>65dB

0.03Lux/F2.0, 30IRE, 0Lux IR on

98.43ft (30m)

Auto/Manual

Pan:0°-360°, Tilt: 0°-180°, Rotation: 0°-360°