Amcrest AMC4KBC6-W Hızlı Başlangıç Kılavuzu - Sayfa 6
Güvenlik Kamerası Amcrest AMC4KBC6-W için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Amcrest AMC4KBC6-W 9 sayfaları. 4k analog hdcvi bullet camera
Sayfayı Yazdır
Most Amcrest DVRs will require you to set the camera to HD-CVI or Analog (960H) settings and may not be
compatible with HD-TVI or AHD. Ensure your 4-in-1 camera's toggle switch is set to the proper setting as indicated
in the diagram below.
Note: If the proper mode configuration is not set, you will not be able to view your camera on your DVR. Please
make sure you have the proper settings on your camera before you begin setting up or installing.
To install your Amcrest 4-in-1 camera, please follow the steps provided below:
Note: Make sure you have the proper mode configuration on your camera before running or connecting any
cables. Refer to the Figure 1-1 for more details on how to set mode configurations for your specific DVR.
Step 1: Connect a BNC (coaxial) cable to the video out connection of your camera.
Step 2: Connect the male end of the DC power connector of the BNC (coaxial) cable to the female end of the
power connector of the camera.
Step 3: Connect the BNC (coaxial) cable to a video out channel on the back of your DVR.
Step 4: Connect the male end of the DC power connector of the power adapter to the female end of the power
connector of the BNC (coaxial) cable. Plug in the power adapter to apply power to the camera.
Technical Specifications
Model
Camera
Image Sensor
Effective Pixels
Scanning System
Electronic Shutter Speed
Minimum Illumination
S/N Ratio
Figure 1-1
AMC4KBC6-W
1/2" CMOS (OS08A10)
3840(H)×2160(V), 8MP
Progressive
PAL: 1/4s~1/100,000s NTSC: 1/3s~1/100,000s
0.054Lux/F1.6, 30IRE, 0Lux IR on
More than 65dB
6