AMD A55 Kullanıcı Kılavuzu - Sayfa 15

Anakart AMD A55 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AMD A55 20 sayfaları. Chipset based m/b for socket fm1 amd processor

(2) ATX 12V Power Connector (4-pin block): ATX12V2

This is a new defined 4-pins connector to provide extra 12V for system stability.

Without this connector might cause system unstable because the power supply

can not provide sufficient current for system.

(3) FAN Power Headers: SYSFAN1 (3-pin), CPUFAN1 (4-pin)

These connectors support cooling fans of 350mA (4.2 Watts) or less, depending

on the fan manufacturer, the wire and plug may be different. The red wire should

be positive, while the black should be ground. Connect the fan's plug to the

board taking into consideration the polarity of connector.

(4)SATA Hard Disk Connector: SATA1, SATA 2, SATA3, SATA4

These are SATA hard disk ports. Please connect SATA device to the connector

with SATA cable. One connector supports one SATA device.

* Note: SATA hard disk ports from A75M are SATAIII connectors that support SATA 6Gb/s

specification. SATA hard disk ports from A55M are SATAII connectors that support SATA 3Gb/s

specification

+12V

GND

Pin1

ATX12V

CPUFAN

SYSFAN1

FAN Power Headers

Pin No.

Defnition

GND

TXP

TXN

GND

RXN

RXP

GND