AMD SB600 Kullanıcı Kılavuzu - Sayfa 13

Anakart AMD SB600 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AMD SB600 16 sayfaları.

3-2 Headers

(1) Line-Out/MIC Header for Front Panel (9-pin): AUDIO1

These headers connect to Front Panel Line-out, MIC

connector with cable. Without install the cable, this header

default setting is 5-6 short, 9-10 short. When you install the

cable you have take off these jumpers.

(2) USB Port Headers (9-pin) :

USB3 / USB4

These headers are used for connecting the

additional USB port plug. By attaching an

option USB cable, your can be provided with

two additional USB plugs affixed to the back

panel.

(3) Speaker connector: SPEAK1

This 4-pin connector connects to the case-mounted speaker. See the figure below.

(4) Power LED: PWR LED1

The Power LED is light on while the system power is on. Connect the Power LED from

the system case to this pin.

(5) IDE Activity LED: HD LED

This connector connects to the hard disk activity

indicator light on the case.

(6) Reset switch lead: RESET

This 2-pin connector connects to the case-mounted

reset switch for rebooting your computer without

having to turn off your power switch. This is a

preferred method of rebooting in order to prolong the

lift of the system's power supply. See the figure

below.

(7) Power switch: PWR BTN

This 2-pin connector connects to the case-mounted power switch to power ON/OFF the

system.

USB3

Pin 1

USB Port Headers

Pin 1

AUDIO

Pin 1

Line-Out, MIC Headers

USB4

Pin 1

PWRLED

JW FP

SPEAK

Pin 1

System Case Connections