AMD SB710 Kullanıcı Kılavuzu - Sayfa 13

Anakart AMD SB710 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AMD SB710 20 sayfaları. Based m/b for socket am2/am2+/am3 series quad core processor
Ayrıca AMD SB710 için: Kullanıcı Kılavuzu (19 sayfalar), Kullanıcı Kılavuzu (20 sayfalar)

Sayfayı Yazdır

(3) PS/2 Mouse & PS/2 Keyboard Connector: KB

The connectors are for PS/2 keyboard and PS/2 Mouse.

(4) USB Port connector: CN5/ UL1 for USB

The connectors are 4-pin connector that connects USB devices to the system

board.

(5) LAN Port connector: UL1 for RJ-45 LAN

The connector is standard RJ45 connector for Network. It supports 10M/100Mbps

data transfer rate.

(6) Audio Line-In, Line-Out, MIC Connector: CN3

These Connectors are 3 Phone-Jack for LINE-OUT, LINE-IN, MIC audio

connections.

Line-in: (BLUE)

Line-out: (GREEN)

MIC: (PINK)

(7) Primary IDE Connector (40-pin block): IDE1

This connector supports the provided IDE hard disk ribbon cable. After connecting the

single plug end to motherboard, connect the two plugs at other end to your hard

disk(s). If you install two hard disks, you must configure the second drive to Slave

mode by setting its jumpers accordingly. Please refer to the documentation of your

hard disk for the jumper settings.

+12V

GND

Pin1

ATX12V

Audio input to sound chip

Audio output to speaker

Microphone Connector

PS/2 Mouse

VGA Connector

DVI Connector

PS/2 Keyboard

10 10

+12V

GND

RJ-45 LAN

USB Connector

Line-IN

Line-OUT

MIC-IN