AMD SB750 Kullanıcı Kılavuzu - Sayfa 11

Anakart AMD SB750 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AMD SB750 20 sayfaları. Based m/b for amd socket am3+ series processor
Ayrıca AMD SB750 için: Kullanıcı Kılavuzu (20 sayfalar)

Sayfayı Yazdır

NOTE!

When you install DIMM module fully into the DIMM socket the eject tab should be

locked into the DIMM module very firmly and fit into its indention on both sides.

2-5 Expansion Card Installation

2-5-1 Expansion Slot

The board provides one PCI-Express2.0 x16@16 lane graphic slot offer 8Gbyte/sec

data transfer rate at each relative direction and up to 16Gbyte/sec concurrent

bandwidth at full speed. Fully compliant to the PCI Express Base Specification

revision2.0, support PCI Express VGA card, and other PCI Express devices. The

additional 32-bit PCI slot also guarantee the rich connectivity for the I/O of peripherals.

2-5-2 Procedure for Expansion Card Installation

1. Read the documentation for your expansion card and make any necessary

hardware or software setting for your expansion card such as jumpers.

2. Remove your computer's cover and the bracket plate on the slot you intend to use.

3. Align the card's connectors and press firmly.

4. Secure the card on the slot with the screen you remove above.

5. Replace the computer system's cover.

6. Set up the BIOS if necessary.

7. Install the necessary software driver for your expansion card.

PCI-E 2.0x16 Slot@16-lane

32-bit PCI Slot