AME 15925 Kullanım Kılavuzu - Sayfa 2

Endüstriyel Ekipmanlar AME 15925 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. AME 15925 5 sayfaları. 5qt. air pump w/ plastic reservoir

Sayfayı Yazdır

SPECIFICATION

Input Air

Input Port

Pressure

Threads

(psi)

90-140

¼-18

NPT

DESCRIPTION

This Air/Hydraulic Pump supplies hydraulic fluid pressure to selected tools. It consists of an in-line air

and hydraulic cylinder. The ratio of hydraulic fluid pressure generated compared to supply air pressure is

100:1. In other words, 100 PSI out of every 1 PSI in – 100 PSI input air pressure equals 10,000 PSI

output pressure.

Depressing the RELEASE pedal causes a decrease in pressure and pressing the PUMP end of the pedal

provides fluid pressure.

The air hydraulic is capable of generating fluid pressure up to 10,000 psi. Make certain the tool in

use is held securely and is in proper working condition. Do not continue to operate the pump once

the work is completed. Failure to comply with these instructions could result in personal injury or

damage to the equipment.

BEFORE USE

To prevent oil leak during shipment, a metal knob is installed and tightened to ensure the best sealing

function. Loosen it counterclockwise before use.

Note: Always secure threaded port connections with non-hardening pipe thread compound. Tighten

securely to prevent accidental removal of components while in use. Take care not to introduce compound

into port orifices. Familiarize yourself with the specifications and illustrations in this operator's manual.

Know your pump, its limitations and how it operates before attempting o use. Refer to specification chart

on above for details of oil port thread size, usable oil capacity, and more.

OPERATION

Operation of the unit is as follows:

1. Connect the hose of the Air/Hydraulic Pump to the hydraulic coupling on the selected tool.

2. Connect the air supply line to the Air/Hydraulic Pimp. Air supply should be 5-10 CFM at 100 PSI to

obtain proper operating characteristics. In addition, the air line should be equipped with an air line

filter

3. Stepping on the PUMP end of the pedal engager the pump, producing the force necessary to run the

tool.

4. Depressing the RELEASE end of the pump pedal will release the pressure.

Output Port

Oil Delivery (cu.in./min)

Threads

0 psi

3/8-18 NPT

24.4

Internal

Relief Setting

(Psi)

10,000 psi

7.3

10,000

WARNING

Usable Oil

Weight

Capacity

(lbs.

(cu.in.)

w/fluid)

140

L+W+H

12.3"x6.7"x7.5"