CO2 Meter RAD-0002-ZR Kullanım Kılavuzu ve Kurulum Kılavuzu - Sayfa 13
Güvenlik Sistemi CO2 Meter RAD-0002-ZR için çevrimiçi göz atın veya pdf Kullanım Kılavuzu ve Kurulum Kılavuzu indirin. CO2 Meter RAD-0002-ZR 18 sayfaları. Oxygen o2 deficiency safety alarm
Ayrıca CO2 Meter RAD-0002-ZR için: Manuel (7 sayfalar)
Sayfayı Yazdır
Configuring AL1
1. Press Mode until the "AL1" & "O2" icon flash
2. Press Enter to select. AL1 level will flash.
3. Use Up/Down arrow to select new alarm level.
4. Press Enter to confirm.
Configuring AL2
1. Press Mode until the "AL2" & "O2" icon flash
2. Press Enter to select alarm 2. AL2 level will now flash.
3. Use Up/Down arrow to select new alarm level.
4. Press Enter to confirm.
Latch ON/OFF
1. Press and hold Up & Enter button for 10 seconds
2. Change to Advance Mode by pressing Mode, and choose Lat Mode
3. Press Up/Down to set Latch Mode On or Off.
4. Press Enter to Save
(Fault light will keep flashing if AL3 is activated, indicating unit went into alarm status.)
13 | P a g e
R A D - 0 0 0 2 - Z R / M a n u a l a n d I n s t a l l a t i o n
G u i d e