Coalesse Lagunitas Manuel - Sayfa 3

İç Mekan Mobilyaları Coalesse Lagunitas için çevrimiçi göz atın veya pdf Manuel indirin. Coalesse Lagunitas 3 sayfaları. Corner screen replacement
Ayrıca Coalesse Lagunitas için: Kurulum Talimatları (4 sayfalar)

Sayfayı Yazdır
5.
To reinstall the corner screen leave the unit on its back
and install the panel clip into the adjacent screen (ensure
the overlapping joint is facing upwards). Push the clip into
the screen until a "click" is heard and verify that the clip
can't be pulled from the screen.
6.
Carefully insert the exposed end of the panel clip into
the opening in the corner screen until a "click" is heard. To
ensure the clip is fully engaged, pull on the screens to
ensure they don't come apart.
7.
Install the two (2) flat head bolts at the front of the bench
but DO NOT tighten.
8.
Install the two (2) socket head bolts into the rear
attachment bracket and tighten to 130 in-lbs.
9.
Go back to the two (2) flat head bolts that were installed
in step 7 and tighten them to 130 in-lbs.
10.
Unit can now be placed upright and the glides
should be leveled.
OVERLAPPING
JOINT
5
SCREEN
GANGING CLIP
10
6
7
9
FLAT HEAD BOLT
8
SOCKET HEAD BOLT
Page 3 of 3
902507401 Rev A