Coast-Air CED-501B Kurulum ve Çalıştırma Talimat Kılavuzu - Sayfa 12

Nem Alıcı Coast-Air CED-501B için çevrimiçi göz atın veya pdf Kurulum ve Çalıştırma Talimat Kılavuzu indirin. Coast-Air CED-501B 18 sayfaları.

Installation and Operation Instruction Manual

OPERATION

Operation

LED display

Shows the set % humidity level from 35% to 85%

or auto start/stop time (0~24) while setting, then

shows the actual (±5% accuracy) room % humidity

level in a range of 30%RH(Relative Humidity) to

90%RH(Relative Humidity).

Error Codes:

AS- Humidity sensor error.

ES- Temperature sensor error.

Protection Codes:

P2- Bucket is full or not in right position-- Empty

the bucket and replace the bucket in the right

position.

Note: When one of the above malfunctions occurs,

turn off the unit, and check for any obstructions.

Restart the unit, if the malfunction is still present,

turn off the unit and unplug the power cord.

Contact the manufacturer or its service agents or

a similar qualified person for service.

www.coastair-ac.com

Removing the collected water

There are two ways to remove collected water:

1.Use the bucket

When the bucket is full, remove the bucket and empty it.

2.Continuous draining

Water can be automatically emptied into a floor drain by

attaching the unit with a water hose (Id≥Φ 5/16",not included)

with a female threaded end (ID:M=1" , not included).

-Drain hose subassembly:

adaptor A (placed in the bucket).

Drain hose

-Remove the plastic cover from the back drain outlet of the unit

and set aside and remove bucket,then insert the drain hose

through the drain outlet of the unit and securely press it into

the connector on the front of the unit. Tighten the adaptor

A and the unit by using two screws (placed in the bucket).

CED-301-501-701B Dehumidifier

water outlet

Install the drain hose onto the

AdaptorA