Coastal HONDA/ACURA IPOD LOCKPICK Kurulum Kılavuzu

Otomobil Aksesuarları Coastal HONDA/ACURA IPOD LOCKPICK için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Coastal HONDA/ACURA IPOD LOCKPICK 4 sayfaları.

Sayfayı Yazdır

HONDA/ACURA IPOD LOCKPICK

Thank you for your purchase of the HONDA/ACURA IPOD LOCKPICK. This unit is designed for

applications in a wide variety of HONDA and ACURA vehicles across many years and models. Advanced

features including on-screen text, steering wheel, radio and touch screen control of your iPOD. The IPOD

LOCKPICK will operate in XM capable HONDA or ACURA radios (button labeled XM present) without the loss

of any factory functions, even if a factory XM tuner is present. Included with your interface are licensed

connectors for reliable iPOD operation and stereo AUX input jacks for connection to any other source you would

like to play through your factory sound system.

The HONDA/ACURA IPOD LOCKPICK uses a simple "T" harness for installation using factory

connectors so there is no need to cut/splice any wires, or locate power, ground and audio. The interface is truly

plug and play. The factory connectors are individually keyed so you cannot plug them into the wrong location.

1. VEHICLES WITH OR WITHOUT A FACTORY XM TUNER PRESENT

•

The installation of the HONDA/ACURA LOCKPICK is the same for vehicles with or without a

factory XM tuner present. After gaining access to the back of the radio, locate the 14 pin

connector which matches the connectors of your IPOD LOCKPICK harness. Unplug the factory

14 pin connector and plug it into the female connector of the LOCKPICK harness. Then plug the

male end of the harness into the former factory location

PROGRAMMING YOUR INTERFACE

•

The HONDA/ACURA IPOD interface is universal in application and requires only a simple

switch setting to properly program it to match your vehicle and options. The IPOD LOCKPICK

is shipped with all switches in the UP position. If your vehicle is already equipped with a factory

XM tuner then place switch 4 in the DOWN position. This will program the LOCKPICK for use

while in the presence of an XM tuner and prevent conflict between the components. If you have

an XM tuner but are not currently subscribed, still place switch 4 in the DOWN position. All

other applications where an XM tuner is not present will leave all interface switches in the UP

position.

lock in the setting you have selected. If you have made a mistake and need to change the

programming setting, unplug the LOCKPICK module first and then change the switch position.

If the interface is not unplugged while changing the programming settings, the new programming

will not be performed and improper operation may result.

3. CONNECT THE IPOD HARNESS AND/OR AUX INPUT

•

Included with your interface is a cable designed to connect an iPOD/iPHONE to the Lockpick.

Plug the cable into the Lockpick and the other end into the bottom of the iPOD/iPHONE. If your

iPOD does not have a bottom docking connector, it is not compatible with the LOCKPICK

interface. Compatible iPODs include NANO, MINI, 4

photo/video. Also available on your LOCKPICK are AUX input jacks which may be connected to

any stereo audio and source and played through your factory sound system.

INSTALLATION AND OPERATION MANUAL

INSTALLATION PROCEDURE

After positioning the programming switch, plug the interface into the harness.

and 5

generation iPODs including

This will