Coastal Amusements LUCKY DUCK Kullanıcı Kılavuzu - Sayfa 11

Otomatlar Coastal Amusements LUCKY DUCK için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Coastal Amusements LUCKY DUCK 16 sayfaları.

Sayfayı Yazdır

Does not move to left

and/or right by

joystick operation

Items

Description

Claw

Don't lower down by【Descend】

Desce

button operation, but only until

nding

time's up

Don't lower down, but the【

Descend】button is in normal

condition

Don't lower down or only down a

bit and close up in the air then it

returns to its home position

Don't fully lower down

Claw

Don't open when reached to exit

Grab

door after seizing

bing

Don't rise up after seizing and is

returned back to its home

position

Don't close up and not be

returned to its home position,

either

1. Check if the left/right motor fuse (LR) at the fuse board is

burned?

2. Check if left and/or right SW is out of function or if their

wires are properly connected.

3. Check if J5 connecting pin of P.C.B. is properly connected.

4. Check if stop-left SW (Gantry & Assembly I No. 21) is in

proper position.

5. Check if Left/Right motor is out of function or if its wires are

properly connected. Also check if its shaft pinion is properly

positioned.

6. Check if J9 connecting pin of P.C.B. is properly connected.

7. Check if all connecting pins of gantry are properly

connected to the machine

1. Check if 【 Descend 】 button is functioning

properly.

2. Check if connecting wires of 【 Descend】 button are

properly connected.

3. Check if J5 connecting pin of PCB is properly

connected.

1. Check if Up/Down motor wires are properly

connected.

2. Check if Up/Down motor is out of function. Also

check if its shaft pinion is in proper position.

3. Check if J9 connecting pin of PCB is properly

connected.

4. Main board break down

1. Check if winding cord is stuck.

2. Check if stop-down SW is functioning properly

1. Check if winding cord is of proper length?

2. Check if winding cord is stuck.

3. Check if stop-down SW is functioning properly

1. Check if stop-back or stop-left SW is out of

function or if their wires are properly connected.

2. Check if the gantry wire connecting to J9

connecting pin of P.C.B. is properly connected.

1. Check if stop-up SW is hit by something.

2. Check if stop-up SW is in proper position and in

normal function.

3. Main board breaks down.

1. Check if the up/down motor are out of function or

if their wires are properly connected.

2. Check if stop-up SW is functioning properly.

3. Main board break down.

Check and Maintenance