Coastal Electronic UFRD 360-2 Lockpick Manuel - Sayfa 8

Kayıt Ekipmanları Coastal Electronic UFRD 360-2 Lockpick için çevrimiçi göz atın veya pdf Manuel indirin. Coastal Electronic UFRD 360-2 Lockpick 15 sayfaları.

Sayfayı Yazdır

17. Remove the screws from the back and sides of the screen. Then separate and remove the cover from the

back of the screen.

18. Next we will remove the factory ribbon cable from the screen. Lift the locking tab on the connector and

unplug the cable. This cable will be replaced with the Lockpick ribbon cable already installed in the

radio. Save this cable and your system can be returned to its prior state anytime you desire.

19. Position the screen rear cover removed earlier, over the radio Lockpick ribbon cable as shown below so

that the cable extends through the slot in the cover. Then lift the screen up to the radio and insert the

ribbon cable into the screen connector.