10Bar G10 Kullanıcı Kılavuzu - Sayfa 9

Kamera Aksesuarları 10Bar G10 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. 10Bar G10 10 sayfaları. Camera underwater housing

5.4 Transportation.

Please protect the housing during transportation. It is recommended to remove the handle, and shutter extension,

and wrap the camera in foam or bubble wrap.

5.5 Accidents

The impact resistance of the housing is excellent. However after an accident the alignment of the housing may

have been altered. Therefore in the event of your housing suffering an impact force, e.g. being dropped, it is

essential that you do not use the housing for diving. Please return the housing immediately for service and put a

note inside to indicate the nature of the accident, so that the severity can be assessed.

6. Service

To ensure the continued performance of your housing, it should be serviced every year, or after every 200 dives

whichever is earlier. Please note the terms for servicing the housing posted at our website. A full service will

include:

l Inspect all components for wears or damage (report if repair necessary),

l Clean all sealing surfaces,

l Replace all O-ring seals,

l Hydrostatic pressure test to 10 Bar.

Note: Replacement of damaged components may require additional cost.