Aktakom ACM-2031 Kullanıcı Kılavuzu - Sayfa 11

Ölçüm Cihazları Aktakom ACM-2031 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Aktakom ACM-2031 20 sayfaları. Ac/dc clamp meter

1. Insert the black and red test leads into the

COM andV:Hz

2.Set rotary switch at desired :

position.

3. Push FUNC. button to select :.

4.If the resistance being measured exceeds the

maximum value of the range or the input is not

connected, an overrange indication "OL" will be

display.

5.Read the measure result directly from LCD

display.

NOTE:When checking in-circuit resistance, be

sure the circuit under test has all power

removed and that all capacitors have been

discharged fully.

CONTINUITY TESTING

1. Insert the black and red test leads into the

COM andV:Hz

2.Set rotary switch at desired :

position. Push FUNC. button to select

3.If continuity exists (i.e., resistance less than

30:) built – in buzzer will sound.

DIODE MEASUREMENT

1. Insert the black and red test leads into the

COM andV:Hz

2.Set rotary switch at desired :

input terminals respectively.

range