Canon 8517A004AA Basitleştirilmiş Kılavuz - Sayfa 6
Yazıcı Canon 8517A004AA için çevrimiçi göz atın veya pdf Basitleştirilmiş Kılavuz indirin. Canon 8517A004AA 14 sayfaları.
Sayfayı Yazdır
3.2. Errors by LED Blinking in Orange and Green Alternately, or Lit in Orange
User unrecoverable errors
LED
alternate
blinking in
Panel display
orange and
green
2 times
802
4 times
804
6 times
806
7 times
807
8 times
808
9 times
809
Lights in
No display
orange
*1:The error code is stored in the operator / service call history of the EEPROM information.
Service mode
4.
4.1 Service mode function
Function
Service test print
EEPROM information print
EEPROM initialization
Waste ink counter reset
Destination settings
Print head deep cleaning
Operation
panel
display
confirmation
Error Code
5100
Carriage error
5C00
Purge unit error
5400
Internal temperature error
5B00
Waste ink absorber full error
5200
Print head temperature rise
error
6800
EEPROM error
6800
RAM error
Procedures
See "Service mode operation
procedures" below.
See "Service mode operation
procedures" below.
See "Service mode operation
procedures" below.
See "Service mode operation
procedures" below.
See "Service mode operation
procedures" below.
See "Operation panel operation
confirmation procedures" below.
Error
1. Check that no foreign material
is inside the printer.
2. Replace the timing slit strip
film.
3. Replace the purge unit.
4. Replace the logic board ass'y.
1. Check that no foreign material
is inside the printer.
2. Replace the purge unit.
3. Replace the logic board ass'y.
1. Turn the printer off, and after a
short period of time, turn the
printer on again.
2. Replace the logic board ass'y.
1. Replace the ink absorber.
2. Replace the logic board ass'y.
1. Turn the printer off, and after a
short period of time, turn the
printer on again.
2. Replace the print head.
3. Replace the logic board ass'y.
Replace the logic board ass'y.
Replace the logic board ass'y.
Set a sheet of A4/LTR- or larger-sized paper.
For print sample, see page 9
Set a sheet of A4/LTR- or larger-sized paper.
For print sample, see page 10.
The following items are not initialized:
- USB serial number
- Destination settings (Japan / Overseas)
- Cleaning flag on arrival
- Waste ink counter
Both the main and the borderless print waste
ink counters are reset at the same time.
Overseas:
i450
Japan:
PIXUS 450i
Cleans black and color, simultaneously.
Confirm the operations of operation panel
display and operation buttons. Perform the
confirmation at operation panel replacement.
6
Solution
Remarks