Canon 8996A001 - i 455 Color Inkjet Printer Baskı Kılavuzu - Sayfa 3
Yazıcı Canon 8996A001 - i 455 Color Inkjet Printer için çevrimiçi göz atın veya pdf Baskı Kılavuzu indirin. Canon 8996A001 - i 455 Color Inkjet Printer 4 sayfaları. Direct printing from pictbridge-compatible digital cameras
Ayrıca Canon 8996A001 - i 455 Color Inkjet Printer için: Kurulum Talimatları (2 sayfalar), Hızlı Başlangıç Kılavuzu (26 sayfalar)
Sayfayı Yazdır
About Digital Camera Settings
When operating the camera, be sure to follow the instructions given in the Instruction Manual supplied
with the camera. Let's take a look at the paper size, paper type, layout, image optimization modes,
and date printing modes that can be set on the PictBridge-compatible camera connected to the
printer.
Confirming or Changing the Camera Settings
When a PictBridge-compatible camera is connected and printing is started with no setting changes, this printer operates based on the
following default settings:
To change the paper size or paper type, operate the camera to select the PictBridge print setup mode and confirm or check the settings.
– Paper size....................................... 4"×6"
– Paper type ...................................... Photo (Photo Paper Plus Glossy)
– Layout ............................................. Borderless
– Trimming......................................... Off (No trimming)
– Image optimize ............................... On (ExifPrint)
– Date print ........................................ Off (If "On" is selected, shooting date is printed in the lower-right corner of each photo.)
The settings explained below cannot be made depending on the brand or model of your camera. If any setting cannot be
made, the default setting explained above is used.
Names of settings that are displayed on Canon PictBridge-compatible cameras are used in the description given below.
Different names may be displayed on your camera depending on the brand or model.
About "Paper Size" and "Paper Type"
By default, 4"×6" is selected in "Paper Size" and "Photo" (Photo Paper Plus Glossy) is selected in "Paper Type" for this printer.
To use Photo Paper Pro, select "Fast Photo" in "Paper type".
If using a Canon PictBridge-compatible camera, you can select 5" ×7" in "Paper Size".
The following sizes and types of paper can be loaded in the printer by selecting options in "Paper Size" and "Paper Type".
"Paper Size" setting
4"×6" (Default)
8.5" ×11" (Letter)
5" ×7" *1
*1 This size can be selected only for Canon PictBridge-compatible cameras. (Note that it cannot be
selected for some models.)
About the Settings Explained Below
"Paper Type" setting
Photo (Default)
Fast Photo
Photo
Fast Photo
Photo
Paper loaded in printer
Photo Paper Plus Glossy
Photo Paper Pro
Photo Paper Plus Glossy
Photo Paper Pro
Photo Paper Plus Glossy