Canon 9319A003AA Servis Kılavuzu - Sayfa 10
Yazıcı Canon 9319A003AA için çevrimiçi göz atın veya pdf Servis Kılavuzu indirin. Canon 9319A003AA 22 sayfaları. Service manual
Sayfayı Yazdır
6. TROUBLESHOOTING FLOWCHART
Power ON
Service Call
Error?
No
Open access cover,
and install print head
Service Call
Error?
No
Connect to computer
Shipment inspection
pattern printing
Correct?
Yes
Main waste ink counter
less than 7%?
Yes
Normal
6-1. Printer Main Unit Troubleshooting Flowchart (how to confirm printer operation at refurbishment)
<Note for normal printer refurbishment>
At end of refurbishment, set the printer to the default shipment conditions (with the paper lifting plate
in the raised position, and the carriage locked in the home position), following the steps below.
1. Install the print head, and while pressing and holding the Power button, connect the AC plug.
After the LED lights in green, with the Power button still pressed, press the Resume/Cancel
button 2 times, and release both the Power and Resume/Cancel buttons. (Each time the
Resume/Cancel button is pressed, the LED lights alternately in orange and green, starting
with orange.)
2. Print the shipment inspection pattern, and reset the EEPROM, following the procedures in 4.
SERVICE MODE.
3. Press the Power button to turn off the printer. (The paper lifting plate is raised, and the
carriage moves to the print head replacement position.) Remove the print head. (DO NOT
print after this point.)
Yes
Yes
See 4. SERVICE MODE for
printing method.
No
Replace print head and print
shipment inspection pattern
Correct?
Yes
No
Visually check the platen waste ink
absorber, and replace it if it is
soiled.
< Shipment inspection pattern check items>
(See APPENDIX 1, SHIPMENT INSPECTION PATTERN 1.)
1. Non-ejection of ink:
2. Top of form:
3. Vertical lines:
4. Gray area:
No
Defective
( 10 / 21 )
Yes
Off the paper
Not connected
White lines / uneven density
NG
NG
NG
NG