Acre Aperio AH40 Manuel - Sayfa 4

Anahtar Acre Aperio AH40 için çevrimiçi göz atın veya pdf Manuel indirin. Acre Aperio AH40 19 sayfaları. Wireless hub

Sayfayı Yazdır

AH40 Gateway

In This Chapter

√

AH40 Gateway Characteristics and General Information

√

Initial Configuration of the AH40 Gateway

√

Connecting and Configuring the Gateway and Lock sets in DNA Fusion

Aperio® AH40 IP Communication Hub

The Aperio® AH40 is a IP Communications (Comm) Hub designed to work with the Aperio® devices and lock

sets. The lock sets and Devices include smart cylinder locks, integrated lock/door sensor combo's, cabinet

and handle lock/reader combo's. Please contact your local RSM for more information or the list of lock sets

and devices offered by acre Security

Aperio® Hub Integration

The Aperio® AH40 Ethernet Enabled Communication

Hub functions as a bridge between ASSA-ABLOY/

Aperio® enabled locks and a variety of acre Security

enabled access control systems such as DNA Fusion.

This allows users of systems such as DNA Fusion

operators to control the Aperio and ASSA-ABLOY

(ASSA) locks remotely from the software.

The Mercury LP 1501, 1502, 2500 and 4502

controllers with the latest Firmware Version or

1.30.1.0663 or higher will support the Aperio®

Hub integration. The controllers support Ethernet

communication to up to 32 Subcontrollers and 64

ACMS. The Aperio® Hub communicates directly with

Aperio®-enabled locks via an encrypted 2.46-Hz

wireless link on 16 distinct channels using AES-128

Bit Encryption. Each Aperio® Hub includes mounting

hardware and instruction manual.

When a cardholder presents a card to an ASSA/

Aperio® lock, the credential information is sent

wirelessly to the Aperio® Hub. The hub then routes

the information to the controller, which verifies the

access rights. The resulting decision is communicated

back to the Aperio® Hub, which either grants or

denies access.

The integration process includes two (2) steps:

●

Hardware Setup - Wire the Aperio® Hub using CAT-5e Ethernet Connection and power from either

POE+ enabled switch devices or from a standalone power source.

●

DNA Fusion Integration - After the hardware is connected, add the Aperio® Hub to DNA Fusion

and build doors in sequence from the readers, inputs, and outputs associated with the Aperio®

Hub.

Integration Guide

Page 1