Aktakom AMM-1081 Kullanım Kılavuzu - Sayfa 17

Multimetre Aktakom AMM-1081 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Aktakom AMM-1081 20 sayfaları. Smart multimeter

3)Select the " Function switch " ( 3-7, Fig. 1 ) to the

" 10 A " position.

4)Power On the meter by pressing the " Power On button "

( 3-2, Fig. 1 ) once, the Display will show " SMART ".

the meter is under " Smart " mode for ACA, DCA.

5)The meter can measure the ACA, DCA value with

10 A range.

5-10 Smart/Auto function selection

When the Display show the " SMART ", the meter is ready

for the Smart mode. Under the " Smart " mode if press

the " Select button " ( 3-4, Fig. 1 ) once ( or once in

sequence ) then can select the individual function, for

example ACV, DCV, ACA, DCA , Diode, Capacitance,

Continuity...testing. In the same time the Display will show

the " AUTO " indicator ( auto range ) or " MANU " indicator

( manual range ).

5-11 Range selection

Under the " Auto range " mode ( Display show the " AUTO "

indicator ), if press the " Range button " ( 3-6, Fig. 1 )

once ( or once in sequence ) then can select the desired

range ( manual range ) and also hold the measurement

range.

The max. measurement

current for the 10 A range should

less than 10 A, otherwise

the protection fuse will be broken.